Search
Search Login/Out
User avatar
Posts: 1603
From: Portishead
Has thanked: 17 times
Have thanks: 20 times

Showroom(beta) Dealership
Top

ZXClub.netAsterlingzx £2k project Inc conversion Post Posted: Mar 24th, '11, 22:48


Nice wheels by the way though. :)

___________________________________________________
Image

User avatar
Posts: 1603
From: Portishead
Has thanked: 17 times
Have thanks: 20 times

Showroom(beta) Dealership
Top

ZXClub.net Post Posted: Mar 27th, '11, 14:59


Waayyyy too low at the back IMO. Looks like the suspension has collapsed. I bet that bounces around like Zebedee from the Magic Roundabout. lol

___________________________________________________
Image

User avatar
Teenager
Posts: 372
From: Watford
Has thanked: 1 time
Have thanks: 0 time

Showroom(beta) Dealership
Top

ZXClub.net Post Posted: Mar 27th, '11, 19:02


Yep :) reminded me of my old xr2.
I Need 2 set it up properly,these are my 1st pics of it out the garage & back home.
All the tweekin can b done on the drive. Planning on bringing the front up 10mm & the back up about 20mm

User avatar
Teenager
Posts: 372
From: Watford
Has thanked: 1 time
Have thanks: 0 time

Showroom(beta) Dealership
Top

ZXClub.net Post Posted: Mar 28th, '11, 16:13


Cheers nath, like funky says it's a bit 2 low.
Il start at the bottom n work up, but I cleared all the speed bumps on my estate ;)

Didn't get the hicas delete done, dw's 1 is a pig 2 fit.
Gotta press old out n the new bush in with a press :(
But I've just got a full set of poly bushes for the hub carriers which mark's gonna press in 4 me.
Top bloke!

User avatar
Posts: 1233
From: Winchester, UK
Has thanked: 1 time
Have thanks: 0 time

Showroom(beta) Dealership
Top

ZXClub.net Post Posted: Mar 28th, '11, 18:42


I think the fronts just about right, just raise the back a bit and it will be perfect.

___________________________________________________
Image

User avatar
Teenager
Posts: 372
From: Watford
Has thanked: 1 time
Have thanks: 0 time

Showroom(beta) Dealership
Top

ZXClub.net Re: Asterlingzx £2k project Inc conversion Post Posted: Oct 3rd, '12, 17:33


Thought I'd do an update cos its been ages:

SMS pulley set & belts now fitted.
New 18" rimms
New targa roofs( new to me )
Full alignment :)
Il get some pic's up tomorrow

User avatar
Teenager
Posts: 372
From: Watford
Has thanked: 1 time
Have thanks: 0 time

Showroom(beta) Dealership
Top

ZXClub.net Re: Asterlingzx £2k project Inc conversion Post Posted: Apr 9th, '13, 18:25


some old pics
R33 GTR brembo calipers after a lick of paint, EBC Discs and silicone rad pipes

brembo.jpg
Open original full sized image
brembo.jpg [ 487.69 KiB | Viewed 4101 times ]


User avatar
Teenager
Posts: 372
From: Watford
Has thanked: 1 time
Have thanks: 0 time

Showroom(beta) Dealership
Top

ZXClub.net Re: Asterlingzx £2k project Inc conversion Post Posted: Sep 27th, '13, 19:33


Not much been happening
My pedals are all where they should b now,finally got round to fitting the manual brake pedal

User avatar
Teenager
Posts: 372
From: Watford
Has thanked: 1 time
Have thanks: 0 time

Showroom(beta) Dealership
Top

ZXClub.net Re: Asterlingzx £2k project Inc conversion Post Posted: Mar 9th, '14, 13:42


Driftworks hicas delete is nearly installed :wozzer:

One side Is done and installed.
One side I just need to get the Balljoint out, my pitman arm has jammed half way through.
Need to order another one off eBay.
Ive managed to do this whilst everything still on the car, just had to remove shocks to allow for access.
And heat up the hub with a torch. U need to heat it while tightening the pitman arm otherwise it doesn't budge!
I've bypass the hicas solenoid in the front by joining the 2 pipes, easy!
Hicas solenoid is now removed :)
Just need to remove all pipe work between redundant pipes at the front and the failsafe valve at the back.

I'll put some pictures up laters

Permissions You cannot post new topics
You cannot reply to topics
You cannot edit your posts
You cannot delete your posts
You cannot post attachments




Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group